top of page

Wearlon® 4545.76 NS

4545.76

NS

Product Description

NS is the most Nonstick coating in our lineup. Having such a high Nonstick rating, NS is slightly less durable than Standard 4545.76, but provides more release. NS is very similar to JC in its nonstick capability. They slightly differ in that NS has both Wearlon's® unique silicon chemistry and added migratory release agents to aid in performance, while JC's components are solely non-migratory/non-sacrificial. Test both to find which coating works best for your application. 

Uses

  • Industrial Mold Release

  • Industrial Adhesive Release

  • Protection from vandalism with stickers; illegal advertising 

  • Prevent sticking of pressure sensitive adhesives (tape/gum)

  • EKG/Electrode Pads

  • Cleanup of holding tanks, ie. paint tanks for striping roads

These are just a few examples of current uses

What Differentiates 4545.76 NS? 

A key factor to NS's success is the fact that it air temperature cures and is extremely easy to coat on your machinery/property. Other coatings with similar nonstick attributes are much harder to apply, many using extremely high heat to cure and needing perfect conditions for it to function correctly. Just spray or roll NS on like a standard house paint, let it properly cure, and you're good to go. A dry and warm environment is ideal for fastest cure time. Check out the Data Sheet for more info.

Why 4545.76 NS?

NS is a step up in Nonstick capability from traditional 4545.76. So if you have used a different Wearlon® coating in the past and are looking for an even higher nonstick rating, this is it. If you are new to Wearlon® and are looking for the best possible nonstick coating, NS gives you maximum performance for release of molds, forms, and any other sticky equipment.

Does 4545.76 NS Need a Primer? 

A Wearlon® Primer is useful for 2 reasons: -Increases adhesion to the substrate and the topcoat to the primer. -Protects from corrosion and high friction/abrasion. NS typically gets adequate adhesion to its substrate, although, having such a high nonstick rating, it can have a difficult time adhering to the surface properly. We suggest using a light (mistcoat) of 2020.90 primer under NS to ensure optimal adhesion. Our 2020.90 primer gets great adhesion to almost any surface and NS gets the best adhesion to 2020.90 Primer. Use a 1:3 ratio of 2020.90 to NS

Key Attributes

Nonstick

Versatile

Sticker Resistant

If you are unsure of which coating would work for your application, contact us to discuss!​​​

  • Ask for samples or test panels

  • Send us a part/unit to coat, we will ship back for your own in-house testing

Related Products...

GET IN TOUCH

Wearlon

(518) 587-7624

mqdefault_edited.png

Marine Coatings

(518) 469-3612

scott-head-shot-for-website-3-adj.webp
bottom of page