top of page

Wearlon® 4545.76 JC

4545.76

JC

Product Description

JC was created specifically to aid in the release of thermoplastic molds in automobile manufacturing. Having such a high Nonstick rating, JC is slightly less durable than Standard 4545.76, but provides more release. JC is very similar to NS in its nonstick capability. Their chemistry slightly differs in that JC's components are solely non-migratory/non-sacrificial, while NS's are not. JC also has better adhesion to surfaces than NS. Test both to find which coating works best for your application. 

Uses

  • Thermoplastic Mold Release (Automobile Industry)

  • Industrial Adhesive Release

  • Protection from vandalism with stickers; illegal advertising 

  • Prevent sticking of pressure sensitive adhesives (tape/gum)

These are just a few examples of current uses

What Differentiates 4545.76 JC? 

A key factor to JC's success is the fact that it air temperature cures and is extremely easy to coat on your machinery/property. Other coatings with similar nonstick attributes are much harder to apply, many using extremely high heat to cure and needing perfect conditions for it to function correctly. Just spray or roll JC on like a standard house paint, let it cure properly, and you're good to go. A dry and warm environment is ideal for fastest cure time. Check out the Data Sheet for more info.

Why 4545.76 JC?

JC is a step up in nonstick capability from traditional 4545.76. It is our best coating if you are having difficulties with industrial adhesive release. It also thrives with mold release and other general nonstick/release applications. JC is designed to make the workplace clean and efficient.

Does 4545.76 JC Need a Primer? 

A Wearlon® Primer is useful for 2 reasons: -Increases adhesion to the substrate and the topcoat to the primer. -Protects from corrosion and high friction/abrasion. JC typically gets good adhesion to its substrate, although, having such a high nonstick rating, it can have a difficult time adhering to the surface properly. We suggest using a light (mistcoat) of 2020.90 primer under JC to ensure optimal adhesion. Our 2020.90 primer gets great adhesion to almost any surface and JC gets the best adhesion to 2020.90 Primer. Use a 1:3 ratio of 2020.90 to JC

Key Attributes

Nonstick

Vandal Resistant

Easy-Clean

If you are unsure of which coating would work for your application, contact us to discuss!​​​

  • Ask for samples or test panels

  • Send us a part/unit to coat, we will ship back for your own in-house testing

Related Products...

GET IN TOUCH

Wearlon

(518) 587-7624

mqdefault_edited.png

Marine Coatings

(518) 469-3612

scott-head-shot-for-website-3-adj.webp
bottom of page