PLASTIC MARITIME CORPORATION
P.O. BOX 2131 - TRAVER ROAD
WILTON, NY 12831 USA
518-587-7624
|
|
WEARLON® SPEED COAT 49-A
|
PREPARED BY: J. R. SMITH
AUGUST 2002
24 HR. EMERGENCY# 800-424-9300
|
|
|
I. PHYSICAL DATA
|
Boiling Point: >212°F.
Specific Gravity (H20=1): >1.0
Vapor Pressure (mm Hg and Temperature): < 21mm Hg @ 20°C
Melting Point: N/A
Vapor Density (Air=1): Lighter than air
Evaporation Rate (Butyl Acetate=1): Slower than Butyl Acetate
Solubility in Water: Miscible
|
|
II. MATERIAL IDENTIFICATION AND INFORMATION
|
COMPONENTS - Chemical Name & Common Names
(Hazardous Components 1% or greater; Carcinogens 0.1% or greater)
|
%
|
OSHA
PEL
|
ACGIH
TLV
|
OTHER LIMITS
RECOMMENDED
|
|
Epoxy Silicone emulsion Cas# 025068-38-6
|
53
|
...
|
...
|
.......
|
|
2-Propoxyethanol Cas# 2807-30-9
|
5
|
...
|
...
|
.......
|
|
... Not established.
|
|
|
|
|
|
Non-Hazardous Ingredients
|
42
|
|
|
|
|
TOTAL
|
100
|
|
|
|
|
|
III. FIRE AND EXPLOSION HAZARD DATA
|
Flash Point and Method Used: 200°F TCC
Auto-Ignition Temperature: N/A
Flammability Limits in Air, % by Volume: N/A
LEL: N/A
UEL: N/A
Extinguisher: Dry foam, Carbon Dioxide
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None
|
|
IV. HEALTH HAZARD DATA
|
Primary Routes of Entry: Inhalation, Ingestion, Skin Absorption
Effects of Overexposure: Possible skin rash. May damage eyes. Contains solvents that have the potential to cause headaches, nausea, dizziness and respiratory irritation.
Emergency and First Air Procedures: Wash hands and eyes with plenty of soap and water. If ingested drink plenty of water. In case of exposure to a high concentration of vapor or mist remove person to fresh air. If breathing has stopped administer artificial respiration and seek medical attention. Call Physician.
|
|
V. REACTIVITY HAZARD DATA
|
Stability:  UNSTABLE  STABLE
Conditions to Avoid: Open flame, spark, and high heat.
Incompatibility (Materials to Avoid): Strong acids, bases, amines can cause polymerization
Hazardous Decomposition Products: may include carbon dioxide or carbon monoxide
Hazardous Polymerization: MAY OCCUR WILL NOT OCCUR
Conditions to Avoid:
|
|
VI. CONTROL AND PROTECTIVE MEASURES
|
Respiratory Protection (Specify Type):
Protective Gloves: Chemical resistant gloves
Eye Protection: Chemical resistant goggles
Ventilation to be Used:
Local Exhaust
Mechanical (general)
Special
Other
Other Protective Clothing and Equipment: Wash after using. Segregate all cleaning apparatus.
Hygienic Work Practices: Avoid contamination of skin.
|
|
VII. PRECAUTIONS FOR SAFE HANDLING AND USE / LEAK PROCEDURES
|
Steps to be Taken if Material is Spilled or Released: Wash with water. Dike all spills; absorb with inert material and collect for disposal.
Waste Disposal Methods: Incinerate or use biological treatment in accordance with Federal, State and Local Regulations.
Precautions to be Taken in Handling and Storage Store at room temperature.
|
