I. PHYSICAL DATA

Boiling Point: > 212°F.
Specific Gravity (H20=1): > 1.0
Vapor Pressure (mm Hg and Temperature): < 21mm Hg @ 20°C
Melting Point: N/A
Vapor Density (Air=1): Lighter than air
Evaporation Rate (Butyl Acetate=1): Slower than Butyl Acetate
Solubility in Water: Miscible

II. MATERIAL IDENTIFICATION AND INFORMATION

COMPONENTS - Chemical Name & Common Names (Hazardous Components 1% or greater; Carcinogens 0.1% or greater)	%	OSHA PEL	ACGIH TLV	OTHER LIMITS RECOMMENDED
2-Propoxyethanol Cas# 0028007-30-9	2	...	...	...
.. Not Established
Non-Hazardous Ingredients	44
TOTAL	100

III. FIRE AND EXPLOSION HAZARD DATA

Flash Point and Method Used: 200°F TCC
Auto-Ignition Temperature: N/A
Flammability Limits in Air, % by Volume: N/A
LEL: N/A
UEL: N/A
Extinguisher: Dry foam, Carbon Dioxide
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None

IV. HEALTH HAZARD DATA

Primary Routes of Entry: Inhalation, Ingestion, Skin Absorption
Effects of Overexposure: Possible skin rash. May damage eyes.
Emergency and First Air Procedures:
    Was hands and eyes with soap and water.
    If ingested, drink plenty of water. Call physician.

V. REACTIVITY DATA

Stability: UNSTABLE STABLE
Conditions to Avoid: Open flame, spark, and high heat.
Incompatibility (Materials to Avoid): Strong acids, bases, amines can cause polymerization
Hazardous Decomposition Products: may include carbon dioxide or carbon monoxide
Hazardous Polymerization: MAY OCCUR WILL NOT OCCUR
Conditions to Avoid:

VI. CONTROL AND PROTECTIVE MEASURES

Respiratory Protection (Specify Type):
Protective Gloves: Chemical resistant gloves.
Eye Protection: Chemical resistant goggles.
Ventilation to be Used:
     Local Exhaust
     Mechanical (general)
     Special
     Other
Other Protective Clothing and Equipment: Wash after using. Segregate all cleaning apparatus.
Hygienic Work Practices: Avoid contamination of skin.

VII. PRECAUTIONS FOR SAFE HANDLING AND USE / LEAK PROCEDURES

Respiratory Protection (Specify Type): Use NIOSH approved respirator.
Protective Gloves: yes
Eye Protection: Safety Goggles
Ventilation to be Used:
     Mechanical (general) - good exhaust
     Special
     Other
Other Protective Equipment:

VIII. SPECIAL PRECAUTIONS

Steps to be Taken if Material is Spilled or Released: Wash with water. Dike all spills; absorb with inert material and collect for disposal.
Waste Disposal Methods: Incinerate or use biological treatment in accordance with Federal, State and Local Regulations.
Precautions to be Taken in Handling and Storage: Mix before using and store at room temperature above 40°F, DO NOT FREEZE.